Work in Progress for NoGa Stands by Kelley Custom Woodworks W4KLY
This section hosted by Norm WA4ZXV

Please contact me directly by email before placing any stand order.  At this time and for the foreseeable future the Baltic birch plywood. an imported product not produced in the USA, is used for the construction all the stands, is no longer available and a suitable alternative has not been found.  I still have a few stands in stock but none for some of the models, so prior to placing any order please contact me to confirm availability. 

Paul Kelley, W4KLY w4kly@bellsouth

The stands have anti-skid feet and come in a light natural finish. The stands are ideal for easier front panel viewing of your rig.

Paul's Notes    NoGa Stand Testimonials  Contact Paul

Basic Stands 101

"Basic Stands" are designed and built specifically for the Elecraft K1, KX2, KX3 and PX3 and the QRP Labs QCX and QCX+ rigs. Stands for most other QRP rigs can be special ordered by contacting Paul." to read " "Basic Stands" are designed and built specifically for the Elecraft K1, KX2, KX3 and PX3, QRP Labs QCX and QCX+ rigs and the icom 705. Stands for most other QRP rigs can be special ordered by contacting Paul."

Combo Stands 101

The 3060 versions of the KX3-PX3 Combo Stands support the KX3 at a 30° angle and the PX3 above the KX3 at a 60° angle. The 6060 versions support both the KX3 and PX3 on the same plane at a 60° angle. The 3060HS and 6060HS versions are identical to the 3060 and 6060 except that each of these provide an additional 3/4" clearance between the top surface of the KX3 and the bottom edge of the PX3 support arms to provide clearance for a heat sink installed on the KX3. One other point: The Elecraft KXD3 paddle will work with the 3060 versions but not work with the 6060 versions with the KX3 at a 60° angle.

Break-Down Stands

These are light weight "three-piece" stands designed primarily for portable use. They assemble and disassemble quickly and easily and take up very little space when disassembled and are very rugged. The small stand works well with a KX3, KX2, QCX or most any other QRP transceiver or other gear that has the controls on the top surface. The "3060 Breakdown Combo" supports the KX3 and PX3 in a similar way as the 3060 Combo described above, but "breaks down" for portable use. It also comes in both a HS and sans-HS version.

DX and Special Orders

Contact Paul for special orders and any order to be shipped outside the US.  The prices shown include shipping cost via US Postal Service Priority Mail or First Class Package Service within the US. The additional cost for orders shipped outside the US via USPS First Class Package International Service typically require an additional charge of $10 to $15 US to cover this additional expense.
 
 

 

KX2 Basic Stand 5.8
$30

KX2 Basic Stand 5.8" W x 2.8" H Deck
KX3 Basic Stand 7.5
$30

KX3 Basic Stand 7.5" W x 3.5" H Deck 		' '
KX3-PX3 Basic Pair' '
$55

KX3-PX3 Basic Pair 		Supports KX3 and PX3 at 45°' '
Supports KX3 and PX3 at 45°
KX3-PX3 60° Pair' '
$55

KX3-PX3 60° Pair 		Supports the KX3 and PX3 at 60°' '
Supports the KX3 and PX3 at 60°
QCX Basic Stand' '
$30

QCX Basic Stand 		2.75
2.75"H x 4.5"W Deck 		' '
QCX+ Basic Stand' '
$30

QCX+ Basic Stand 		Supports the QCX+ at a 30° angle' '
Supports the QCX+ at a 30° angle 		' '
KX2/KX3/QCX Breakdown Stand' '
$25

KX2/KX3/QCX Breakdown Stand 		3-Piece
3-Piece "Breakdown" Stand 		Suitable for many QRP rigs.' '
Suitable for many QRP rigs.
IC705 Stand' '
$30

IC705 Stand 		' '
IC705 Breakdown Stand' '
$25

IC705 Breakdown Stand 		Supports the IC705 at 30°' '
Supports the IC705 at 30° 		' '
KX3-PX3 3060 Combo Stand' '
$45

KX3-PX3 3060 Combo Stand 		Holds the KX3 at 30° and the PX3 at 60°.' '
Holds the KX3 at 30° and the PX3 at 60°. 		Works with a KXPD3 Paddle.' '
Works with a KXPD3 Paddle.
KX3-PX3 3060HS Combo Stand' '
$45

KX3-PX3 3060HS Combo Stand 		Same as 3060 with additional 3/4
Same as 3060 with additional 3/4" clearance for "add-on" heat sink. 		Works with a KXPD3 Paddle.' '
Works with a KXPD3 Paddle.
KX3-PX3 6060 Combo Stand' '
$45

KX3-PX3 6060 Combo Stand 		Holds both the KX3 and the PX3 at 60°.' '
Holds both the KX3 and the PX3 at 60°. 		Does not work with a KXPD3 Paddle.' '
Does not work with a KXPD3 Paddle.
KX3-PX3 6060HS Combo Stand' '
$45

KX3-PX3 6060HS Combo Stand 		Same as 6060 with additional 3/4
Same as 6060 with additional 3/4" clearance for "add-on" heat sink.
KX3-PX3 3060BD 3-Piece
$30

KX3-PX3 3060BD 3-Piece "3060" Type Stand 		3 piece Breakdown Stand ' '
3 piece Breakdown Stand 		' '
KX3-PX3 3060HSBD 3-Piece
$30

KX3-PX3 3060HSBD 3-Piece "3060HS" Type Stand 		Same as 3060BD with additional 3/4
Same as 3060BD with additional 3/4" clearance for "add-on" heat sink. 		' '

NoGa Stand Testimonials

Click on the link below to see a testimonial.
Use the "return" button in your browser to return to this page.

Click HERE to return to the NoGaQrp

W0GIN  

K4RLL   ANOTHER   AG4GC   K0RGI

N7TB   K2WO   AA4GA W0OPO